C) Time Fm Set - Renkforce MR18 Bedienungsanleitung

If you set the volume to 00, only the display will light up at the set alarm time, but
no alarm signal will sound.

c) Time FM Set

With this menu item, you can set the radio timer. The radio switches on at the
desired time. In addition, a radio recording can also be started.
• Open the "Time FM Set" menu item.
• You will get to the submenu with these menu items: "Close/Open Time FM", "Close/
Open FM Rec", "FM time", "Tuner Region" and "Exit".
Setting the radio timer
• Choose the "FM time" menu item.
• You will get to the time setting of the radio timer.
• Use the -/+
to the number of minutes.
• Set the minutes with the
will be stored.
Activating the radio timer
• Choose the "Close/Open Time FM" menu item.
• Press the M button (1) to switch between "Open Time FM" and "Close Time FM".
• If you activate the timer, the radio will switch on at the set time.
Activating the recording timer
The recording timer functions only if the radio timer is also activated.
• Choose the "Close/Open FM Rec" menu item.
• Press the M button (1) to switch between "Open FM Rec" and "Close FM Rec".
• The radio will start a radio recording at the set time.
• Pause the recording by briefly pressing the Power/Play button (2) once. Press the
Power/Play button briefly again to continue the recording.
• Stop and store the recording by pressing the Power/Play button (2) and holding it down.
buttons (3, 4) to set the hours. Then press the M button (1) to change
-/+ buttons (3, 4). Then press the M button (1). The time
47