Before First Use; Preparation; Switching On And Off - Westfalia 88 85 44 Bedienungsanleitung

Before first Use

Remove the ash vacuum out of the packing and check all parts for damage in
transit. Dispose of packaging materials or store them out of reach of children.
Plastic bags etc. may become a deadly toy for children.
The ash vacuum is designed for removing cold (amber-free) ashes from fireplac-
es and for sucking coarse dirt. Any other use not described in this manual is
considered as inappropriate use and may damage the ash vacuum.

Preparation

1. Attach the wheels to the ash tank if they are desired.
2. Open the ash vacuum and remove all accessories. Insert the aluminium tube
(6) into the suction hose (10).
3. Insert the suction hose (10) into the provided suction flange (4) of the ash tank
(9). To lock the suction hose turn clockwise.
Attention: In order not to damage the suction hose (10) do not turn in opposite
direction and do not bend the hose on the hose connection!
4. Place the filter (11) tightly onto the motor on the top part and secure it with the
wing nut.
Before switching on the ash vacuum make sure the filter is not damaged.
5. Place the top part on the ash tank (9) and lock the lid with
the clamps (8). The ash vacuum is now ready for use.
Make sure the suction opening of the aluminium tube (6) is
not blocked. A blockage may damage the appliance.

Switching ON and OFF

1. Switch on the ash vacuum by pressing the ON/OFF button
(2).
2. To switch off the appliance, press the button again. Always pull the power plug
from mains when not using the appliance.
When using the suction hose make sure the hose is not bent. This will damage
the suction hose and the ash vacuum will lose its suction power. The suction
hose must be placed that way so that it forms a natural curve while sucking.
Operation
9