schellenberg ROLLOPOWER Anleitung Seite 20

Any other or further utilization beyond the explicitly specified
shall be regarded as not intended.
The Alfred Schellenberg GmbH shall not be liable for any
consequential damage, property damage and personal injury
due to improper use.
Please keep these instructions stored in a safe place, as they
must be available to every user.
Compatible with most exchange frames with a 50 x 50 mm
cutout according to DIN 49075. An adapter from the respec-
tive manufacturer is required. The timer switch features an
automatic changeover between daylight savings and standard
time. During the clock change the internal clock will be set
ahead or back by 1 hour.
ce DeclaratIon anD conFormIty
The product meets the applicable requirements of the Euro-
pean and national guidelines. Conformity was evidenced, the
corresponding EC declaration of conformity is included with
the product or can be requested from the after-sales service
section. E-mail address: service.int@schellenberg.de
20