Recording Audio; Cleaning And Maintenance; Accessories - Omnitronic BD-1380 Bedienungsanleitung

8.2 Recording audio

1 Save the current the project in the *.aup format under File/Save Project As...
2 Set the turntable for a recording and put on a record.
3 Click on the record symbol
4 Click on the pause symbol
5 Click on the stop symbol
Refer to the software's instruction manual for further information on numerous editing capabilities and
other additional functions.

9. CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the turntable. Please use a soft lint-free and moistened cloth. Never
use alcohol or solvents! For dusting the stylus and the records, use a carbon fiber brush for records (e.g.
item 10608985 carbon fibber brush).
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers. Should you need any spare parts, please use genuine parts. Should you have
further questions, please contact your dealer.
9.1 Transport
For dispatching the turntable pay attention that the tone arm weight and all other components of the unit are
only packed in their original packing material and/or are especially secured for transportation.
1 Place the protective cap on the stylus.
2 Secure the tone arm with the locking lever.
3 Unscrew the counterweight for the tone arm by turning it clockwise, pack it separately, and secure it
against displacement.
4 Please use the original packing box.
CH

10. ACCESSORIES

10.1 Replacement phono cartridge system and stylus
If required, the phono cartridge system or the stylus can easily be replaced. The corresponding replacement
parts are available from the retailer, e. g. the magnetic phono cartridge system S-15 and the matching stylus
S-15 from OMNITRONIC.
1 To change the stylus, pull off the stylus support in forward direction. Put the new stylus on the stylus
system.
2 To change the phono cartridge system, screw off the headshell from the tone arm.
3 Screw off the phono cartridge system from the support and pull off the connection wires.
4 Tightly screw the new phono cartridge system on the support and put on the wires as follows:
white left channel positive pole
blue left channel negative pole
red right channel positive pole
green right channel negative pole
to start recording.
to pause the recording. To continue, press the button once again.
to stop the recording.
24/25 10603041-MANUAL-1.00-DE-EN_00042058, Version 1.0