WSS ATELIER F/R Montageanleitung Seite 21

6.3.2 Insert cover clamping plate F2 on clamping plate B. Secure panic push bar wth hexagon
screws (scope of delivery panic push bar glass) and Allen key SW3 on clamping plate B
panic push bar opposite. Insert square pin (scope of delivery panic push bar glass) into
the square hole (fig 9).
Fig. 9
B
6.3.3 Install any possible profile cylinder and secure sidewise with slotted screw G to lock case A
(fig. 10).
Fig. 10
G
Wilh. Schlechtendahl & Söhne GmbH & Co. KG
F2
GB 21