Installation Panic Push Bar - Wss Atelier F/R Montageanleitung

6.2.3 Install any possible profile cylinder and secure sidewise with slotted screw G to lock case A
(fig. 7).
Fig. 7
G
6.3

Installation Panic Push Bar

6.3.1 Install lock case A as described under 6.1 installation lock case. Prepare push bar up
till installation step D as described in instruction t-0145_ma_Druckstange_kuerz-
bar_(DE)_2. Insert cover lock E on pre-assembled lock case A. Secure door knob M on
clamping plate side with Phillips screws H to lock case A.
Install clamping plate of the opposite side of the push bar with hexagon screws and
isolation sleeves (scope of delivery panic push bar glass) as shown in fig. 8.
Fig. 8
M
H
20 GB
E
B
A
fig. shows handle-knob-set installation
J
Wilh. Schlechtendahl & Söhne GmbH & Co. KG