Recommended Maintenance Schedule; Notes On Servicing The Sunbed; Care And Cleaning - SOLTRON ENERGY TX 700 Bedienungsanleitung

Wartung

Recommended maintenance schedule

Component
Energy TX XR 100 W
UV low-pressure lamp
Energy TX XR 160 W
UV low-pressure lamp
UV high-pressure lamp
Filter pad, base
Filter pad, canopy
Water filter, air-conditioning pump
Component
Acrylic cover, canopy
Base top (acrylic panel base)
Partition panel
Filter panels on facial tanner
Sunbed fans
Main fan
Steel rope (lifting mechanism)
Spring (lifting mechanism)
Spring (safety mechanism)
18
Change after ... operating
JK-Part No.
hours
approx. 400 11944
approx. 500 11945
400 to 600 10072
84475
as needed 84478
51492
Change after ... operating
JK-Part No.
hours
approx. 3,000 84235
approx. 3,000 84236
approx. 3,000 84234
approx. 5,000 51558
approx. 40,.000 11486
approx. 40,.000 11595
51320
max. 10,000
51443
min. every 5 years
51574

Notes on servicing the sunbed

Caution - Live Components!
On permanently connected sunbeds, switch off or remove the fuses and ensure that the equipment
cannot be switched back on!
Warning!
When replacing UV lamps or filter panels, use only original components of the same type! If other UV
lamps or filter panels are used, CE compliance and GS certificate will be invalidated.
Warning!
We draw your attention to the fact that the sunbed must be routinely checked at appropriate intervals
in order to maintain it in full working order! (See VDE Regulation 0105 Part 1 (in particular para. 5).
Danger!
There is a risk of injury from the canopy suddenly falling!
If steel ropes and springs are not regularly replaced at the intervals recommended in the maintenance
instructions, these components may break.

Care and cleaning

Warning!
Important notes on cleaning and caring for your sunbed!
Use only the special fast-acting disinfectant cleaner we supply for the perspex surfaces. Other plastic
parts are best cleaned simply with warm water and a leather. Under no circumstances should aggres-
sive cleaning products be used e.g. the proprietary substance Sagrotan, or cleaning substances which
contain alcohol or ethereal oils. Such substances can, over time, result in damage which will not be
covered by the warranty.
Warning!
The decorative surface of the canopy must never be cleaned with polish or other abrasive material, as
it can immediately be damaged.
The folded edges of acrylic panels can present slight unevenness or air inclusions. It is also possible
for cleaning cloths to show black traces when cleaning rubber seals. Both of these things are a result
of the production process and not cause for complaint.