More Features - auna 10004779 Handbuch

PLAYBACK OF MP3 SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 FILE WHICH STORED IN
THE MEMORY MEDIA WITH USB CONNECTING PORT OR SD/MMC MEMORY CARD.
1. SET THE SYSTEM AT STANDBY MODE FIRST OR OTHER FUNCTION EXCEPT
SD OR USB MODE.
2. PLUG-IN THE USB PEN-DRIVE WITH THE FACE UP & MAKE SURE IT GOING
INTO COMPLETELY OR INSERT THE MEMORY CARD IN THE DIRECTION OF
THE ARROW AS SHOWN IN THE LABEL ON THE UNDERSIDE OF THE
MEMORY CARD SLOT COVER. INSERT STRAIGHT WITHOUT BENDING.
 CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD DAMAGE THE AUDIO
SYSTEM OR THE STORAGE MEDIA (USB THUMB DRIVE / SD/MMC CARD). CHECK TO
BE SURE THE DIRECTION IS CORRECT BEFORE CONNECTION.
3. SET FUNCTION BUTTON (6) TO "
4. THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER CONNECTING,
AND LCD DISPLAY (12) WILL SHOW THE TOTAL NUMBER OF MP3 FILES BEING DETECTED.
5. REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE.
REMARK
THE SYSTEM CAN DETECT AND READ THE FILE UNDER MP3 FORMAT ONLY AT USB/SD MODE BUT
-
NOT OTHER MUSIC FILE FORMAT.
IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN
-
MP3 ENCODING FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB
SOCKET. THIS IS NOT A MALFUNCTION OF THE SYSTEM.
USB PORT DOES NOT SUPPORT CONNECTION WITH USB EXTENSION CABLE AND IS NOT
-
DESIGNED FOR COMMUNICATION WITH COMPUTER DIRECTLY
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO
EITHER CD, AUX OR TUNER FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET
DIRECTLY, FOR MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD
BEING PARTIALLY EJECT AND YOU CAN REMOVE IT BY HAND.
A. Sleep function
1. Press " Sleep " button (11) "slp-90 " will shown on the LCD display (12).
2. Keep pressing the button to adjust the sleep timer in the order of 90 > 80 > 70 >....10 minutes
respectively and sleep icon "
3. System will stop and go to standby mode automatically after running the selected time.
4. To cancel the sleep mode, press " sleep " button until "SLP-off' displayed and the "
disappear on LCD display.
B. Alarm clock setting
This function allows the system to turn on automatically and wake you up by CD , Tuner, USB, SD mode
respectively.
Press and hold the " Alarm " button (2) to enter the alarm setting mode, the first two digits of clock will
flashing with alarm icon
Alarm " button(2) again to confirm. Then press " Skip up
& press " Alarm " button (2) to confirm the alarm time, press " Skip up
select wake up mode & press " Alarm " button (2) to confirm. Then press up/down button (10,4) to adjust
the wake up volume level. Press the alarm to complete the alarm setting.
" SD/MMC CARD OR "

More features

" will indicate on LCD.
. Press " Skip up / down
" USB MODE.
" button (15,21) to set the hour & then press "
/ down " button (15,21) to set the minutes
/ down
" indicator
" button (15,21) to