Functional Description - Abicor Binzel G3000 Originalbetriebsanleitung

5 Functional description

4.1 Transport
Checking procedure
on receipt of goods
In case of damage
In case of complaints If the delivery has been damaged during transport, contact the last carrier
Packaging for return
shipment
Tab. 7
Transport
4.2 Storage
5 Functional description
1
6
5
1 Fastener
2 Connector with hinge
Fig. 1 Overview Gouging Torch
EN - 8
The scope of delivery is carefully checked and packaged, however damage
may occur during shipping.
Make sure that the shipment is complete by referring to the delivery note!
Check the delivery for damage (visual inspection)!
immediately! Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Physical storage conditions in a closed environment:
 2.3 Technical Data on page EN-4
The inserted springs act with their holding force directly upon the triggering
flange and fix the switching axis, which is positioned by three pins, in zero
position. In case of collision the switching axis tips over and the triggering
flange pushes the spring plate in the direction of the bottom of the case and the
trigger is actuated by the actuating mechanism of the spring plate. The trigger
is an NC contact. The applied switching voltage is interrupted.
4
3 Hollow cable
4 Handle
The fastener (1) is used for clamping the carbon electrodes. The clamp levers
are protected by insulating jaws (6). The handle (4) contains the valve seat for
opening and closing the compressed air.
Gouging torch G3000/G4000
2
5 Nozzle
6 Insulating jaws
3