Operator Panel; Before First Use; Putting Into Operation; Maintenance And Cleaning - Venta LW45 Bedienungsanleitung

operator paneL

1 2

beFore FirSt uSe

Remove trial package from Styrofoam packaging.
illustration 1: Remove upper housing. Remove transport protection from the upper housing.
Remove disk stack. Remove transport protection from the lower housing.

putting into operation

• Place the Airwasher on a dry and level surface at least 50 cm from the walls, furniture and any
other objects.
• Check whether switching power supply or cable are free from damage.
illustration 2: Remove upper housing. Fill water into the lower housing. the appliance may
never be filled with the upper part in place! Filling level: See marker in the lower housing
(approx. 5 cm below the trough rim). Add entire content of the Venta hygiene agent (sample bottle
50 ml). Insert disk stack again.
illustration 3: Replace the upper housing. Plug the appliance into the mains. Switch on the
appliance with button 1
15), 1 - 2 - 3 (LW 25/45) with selector button 5 .

maintenance and cLeaning

unPlug sWitching PoWer suPPly in case of all cleaning and maintenance
Work!
daily
Switch off appliance with button 1
top up with fresh water into the lower housing. Mount top cover again. Switch on the appliance
with button 1 .
3 4 5
and operation display 2
and unplug switching power supply. Remove upper housing and
1
O N / OFF button
2
O peration indication ON / OFF
Continuous lighting: ON
No lighting: OFF
Flashing: Fault
(see Eliminating faults)
3
F an stage display 1 - 2 (LW 15),
1 - 2 - 3 (LW 25/45)
4
A utomatic shut-off display
(see "Automatic shut-off")
5
F an stage selector button
1 - 2 (LW 15), 1 - 2 - 3 (LW 25/45)
lights up. Select required fan stage to 1 - 2 (LW
13