Herunterladen Diese Seite drucken

Nordpeis Barcelona Montageanleitung Seite 3

Vorschau ausblenden Andere Handbücher für Barcelona:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Barcelona
Insert
N-27/N27D
Steel chimney
Can be installed with steel chimney.
Weight including insert
Barcelona with insert N-27
Barcelona with insert N-27D
Weight accessories
Front bench
Front bench with frame
Lateral bench
Safety distances (FIG 1)
Ensure that the safety distances are complied with.
Please note that these safety distances can vary from
country to country.
The distance from the glass in the door of the insert to
an inflammable wall must be of at least 800 mm.
The distance between the top of the convection air
outlet and roof of inflammable material must be at least
500 mm.
The distance from the surround to a lateral combustible
wall must be at least 30 mm.
The distance to any inflammable material in front of the
opening of the insert must be of at least 1,5 m.
*The illustration indicates the approximate center height
of the hole for the flue. Distortions in the floors and walls
may influence the height. Dry stack the fireplace until
the mantelpiece element for accurate height and
positioning of the flue/chimney connection.
Also mark the floor in case fresh air supply will be
brought up through the flooring. (Accessory)
Assemby Instructions (FIG 2 - FIG 12)
FIG 2: Place the bottom plate in 90º relative to the
chimney/wall. If needed, adjust with wedges or powder
glue.
FIG 3: Important! The back walls of the surround must
be mounted BEFORE the insert is positioned.
502 kg
507 kg
FIG 4: With posterior connection gently knock out the
perforation for the flue before placing the insert.
83 kg
If the fireplace is connected to a chimney at the
116 kg
top, the smoke lid must be moved to the rear flue
173 kg
outlet.
FIG 8/9: The element 7A must be used if the surround
is assembled without front bench. The element 7B
must be used if the surround is assembled with front
bench.
Ensure that there is distance between the insert and
the surround at all sides as the insert will expand
when used.
Fresh Air Supply (accessory)
See separate assembly instructions for fresh air supply.
GB
3

Werbung

loading

Diese Anleitung auch für:

Fp-bar00-100