Herunterladen Diese Seite drucken

Wartung Und Pflege; Care And Maintenance - CORE SENSOR 2 Anleitung

Werbung

LEINENLÄNGEN KONTROLLE/
Von Zeit zu Zeit sollte die korrekte Länge der
die Enden der Flugleinen an einem Haken.
per hin ziehen. Jetzt müssen alle Leinen gleich
lang sein.
LINE LENGTH CHECK/
You should check your line lengths on a regular
When the adjuster is open fully and you pull
the bar towards your body all lines have to be the
same length.

WARTUNG UND PFLEGE/

Spüle deine SENSOR Bar nach jedem Gebrauch
mit Süsswasser ab. Vergewissere dich, dass alle
Sicherheitssysteme immer leichtgängig und frei
von Sand und Verschmutzungen sind. Zum
Auswaschen des ROTOR Quickrelease muss das
gründlich ausgespült werden.

CARE AND MAINTENANCE/

clear water. Always make sure that all safety sys-
tems work properly and are free from sand and
dirt. To clean the ROTOR Quickrelease you have
to release/open the release, then you can rinse it
with water.
17
de
-
en
de
en

Werbung

loading

Verwandte Produkte für CORE SENSOR 2

Diese Anleitung auch für:

Sensor 2+