Display Surface - mt vision HSR 8200 Bedienungsanleitung

4. First steps

4.3 Display surface

Open the Main Menu.
Please select which camera you want to display on the screen. In this view
only one camera view is possible.
In this view mode, up to 4 cameras can be displayed simultaneously. Select
between cameras 01-04 or cameras 05-08.
In this view mode, all 8 cameras are displayed simultaneously.
Opens the menu for camera control. Here you can control the camera remo-
tely (rotate, zoom, or adjust the focus) . These functions are only available if
the camera has these properties.
Opens the playback mode. In this window you can select a camera and an
appropriate date to bring up the recording archive directly.
Opens the recordings. Activate the cameras you want to record. Choose bet-
ween Plan (programmed recording), Manual (Manual Recording) and Stop
(there is no recording is started).
Opens the Network Security Map. Here you can see all the devices found on
the network. In this menu, you can also add or remove new cameras.
Open the Alarm menu.
Log out from the menu to refused access unauthorized persons. Driving
down the system or start it again.
08
ENGLISH