Fast Forward/Rewind; C) Recording - Renkforce TP-1010USB Bedienungsanleitung

• Push the button PLAY (10).
• Playback commences.
• Push the button PAUSE (14) again to interrupt playback briefly. To continue the playback, push the button PAUSE
(14) again.
• Push the STOP/EJECT (13) button once to stop playback.
• Push the button STOP/EJECT (13) again to remove the inserted cassette.
Playback is stopped automatically when the tape end has been reached.
When both drives are in the playback function, the signal from drive A is output on the LINE PLAY/OUT
connection.
b) Fast Forward/Rewind
• Before fast forwarding or rewinding the cassette, you have to terminate playback with the button STOP/EJECT (13).
• Push the button FORWARD (12) to fast-forward the cassette, push the button REWIND (11) to rewind the cassette.
• Push the STOP/EJECT (13) button to stop fast forwarding.
Fast forwarding or rewinding is stopped automatically when the tape end has been reached.

c) Recording

• Cassettes can only be recorded in drive B.
• Push the button POWER (1) to switch on the device.
• Push the drive button STOP/EJECT(13) of drive B.
• Insert an unrecorded cassette into drive B with the tape opening down.
• Close the drive cover again.
• In case of a CrO2-cassette, push the button REC CrO2 (9). With the button activated, a red control LED lights up
in the display (3) above the button.
Recording from an external audio source
• Select the desired audio source from which you want to record the signal at your amplifier.
• Push the button PAUSE (14) at drive B.
• Push the RECORD (15) and PLAY (10) buttons of drive B at the same time.
• Start playback at your recording source and push the button PAUSE (14) at drive B again to start playback.
• During the recording, a light indicator LED lights up in the display (3) at the upper right.
• Control the recording with the controller REC LEVEL (5) by setting the controller so that the red segments of the
balancing display in the display (3) flash briefly only during signal peaks.
• Push the button PAUSE (14) to interrupt recording briefly. To continue the recording, push the button PAUSE (14)
again.
27