Mains Cable; Usb Output; Playing A Cassette - Renkforce TP-1010USB Bedienungsanleitung

(1) Mains cable

Mains line for connection to a proper mains socket (220 - 240 V/50 Hz) of the public mains.

(2) USB output

USB output for connection to a computer
(3) GAIN controller
For adjusting the USB audio output level.
(4) LINE IN/REC
Cinch input for connection to the audio amplifier.
(5) LINE OUT/PLAY
Cinch output for connection to the audio amplifier.
a) Playing a Cassette
• You can play back cassettes in both drives (deck A and B).
• Push the button POWER (1) to switch on the device.
• Push the drive button STOP/EJECT(13). The corresponding cassette drive (2) opens. Wait until the cassette drive
has opened entirely.
• Insert the recorded cassette into the drive with the tape opening down.
• Close the cassette drive by slowly pushing shut the drive flap. If you cannot close the cassette drive, check that the
cassette is positioned correctly in the cassette drive or the flap.
• Close the drive flap again.
• Select the tape input at your amplifier.
• In case of a CrO2-cassette, push the button PLAY CrO2 (6). With the button activated, a green control LED lights
up in the display (3) above the button.
26