Safety Notes - Renkforce TP-1010USB Bedienungsanleitung

5. Safety Notes

The guarantee/warranty will expire if damage is incurred resulting from non-compliance with these
operating instructions. We do not assume liability for any consequential damage.
We do not assume any liability for property damage and personal injury caused by improper use
or non-compliance with the safety instructions. In such cases the warranty/guarantee is voided.
Dear Customer: the following safety information is intended not only for the protection of the device but also
for the protection of your health. Please read the following items carefully:
• For safety reasons, any unauthorized conversions and/or modifications to the product are not permitted.
• This device is a protection class II product. Only a proper mains socket (220 - 240 V/50 Hz) of the public
supply net must be used as voltage source.
• Ensure proper commissioning of the device. Observe the operating instructions for it.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mechanical
stress. Avoid excessive thermal stress on the mains cable from extreme heat or cold. Do not modify the
mains cable. Otherwise the mains cable may be damaged. A damaged mains cable can cause a deadly
electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket (e.g. via
the respective circuit breaker and FI switch) and then carefully pull the mains plug from the mains socket.
• In order to completely separate the device from the mains, you have to pull the mains plug out of the wall
socket. It is not sufficient to turn the device off with the on/off switch.
• This product is not a toy and not suitable for children. Children cannot judge the dangers involved when
handling electrical devices.
• Never pour liquids on electrical devices and do not place any containers filled with liquids (e.g. drinking
cups) on them. There is great danger of fire or potentially fatal electric shock. If this is the case, first
power down the respective mains socket (e.g. switch off circuit breaker and FI switch) and then pull the
mains cable from the socket. Disconnect all cables from the device. Do not operate the product anymore
afterwards, but take it to a specialist workshop.
• Never plug in or unplug the mains plug when your hands are wet.
• Make sure the device is sufficiently ventilated when in operation. Do not cover the ventilation openings or
the device with magazines, blankets, curtains or similar.
• Do not expose the device to any high temperatures, dripping or splashing water, strong vibrations or
heavy mechanical stress.
• Do not place any open sources of fire, such as burning candles, on the device.
• Consult an expert when in doubt as to the operation, safety or the connection of the device.
• Never operate the device unattended.
• Only use the device in a moderate climate and avoid any tropical environment.
• Do not leave any packing material unattended. It may become a dangerous toy for children.
• Also observe the additional safety information in the individual chapters of these operating instructions.
• Also observe the safety and operating instructions of any other devices that are connected to the device.
• If you are not sure about the correct connection or if any questions arise which are not covered by the
operating instructions, do not hesitate to contact our technical support or another specialist.
21