Electrical Connection - AEG Electrolux S92358-KA2 Gebrauchsanweisung

Connecting the water hose.
The water coupling is connected to a
water tap with an external 3/4 inch
thread.
This work is to be carried out by a
skilled plumbing installation
technician. The refrigerator is to be
connected with a shut-off cock.
There are different type-approved
taps and tap assemblies on the
market.
The water hose must not be cracked,
squeezed or be in tight bends.
Before the refrigerator is taken into
use in its final location, ensure that
the water connection has been
correctly carried out, that there is no
leakage at the connection to the
water tap, and that the four spacers
are properly in position, see the
illustration.
We recommend that the appliance is
placed on a "run-off" mat intended
for refrigerators and freezers, which
makes it easier to detect possible
leakage.

Electrical connection

Connect the cabinet to a grounded
electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left
inside the cabinet.
21
AEG/Electrolux 8184261-00/9