Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The DCF time is automatically synchronised every day. This is sufficient to keep the
deviation less than one second per day.
The DCF signal is encoded and transmitted via a DCF
transmitter in Mainflingen (near Frankfurt am Main). Its
range is up to 1500 km and, under ideal reception condi-
tions, even up to 2000 km.
Among other things, the DCF signal includes the precise
time (theoretical deviation of one second in a million
years!) and the date.
Naturally, this also eliminates the hassle of manually set-
ting up summer and winter times.
manually PerForming the dcF signal receP-
tion attemPt
-
To perform a manual search for the DCF signal (e.g., if you have placed the ra-
dio alarm clock in a different location), keep the buttons UP (4) and DOWN (8)
pressed simultaneously for three seconds.
-
This will start a new reception attempt. Then, as described above, wait for a few
minutes until the correct time is displayed.
-
To interrupt the DCF reception attempt, keep the buttons UP (4) and DOWN (8)
pressed likewise at the same time for three seconds
manual settings
Manual setting is only necessary when the radio-controlled alarm clock is
used outside of the DCF reception range, if you want to display a different
time zone other than Germany, or if the DCF reception is disrupted due to
environmental conditions.
If the settings were changed and after that DCF reception is again desired,
a manual DCF reception attempt (see above) must be made.
The setting mode is automatically terminated after the lapse of 15 seconds
without any entry.
-
Keep the MODE (1) button pressed for three seconds to access the setup mode.
-
Set the desired display format (12/24 h) by the UP (4) or DOWN (8) buttons.
-
Press briefly the MODE button (1).
-
Set the hours display using the UP (4) or DOWN (8) buttons.
-
Press briefly the MODE (1) button and set other indications (minutes, seconds,
year, month, date, time zone and language of week days display) using UP (4) or
DOWN (8) buttons.
Days of the week can be displayed in 8 different languages:
GE = German
FR = French
NE = Dutch
DA = Danish
The time zone can be changed in a +/-12 h range. Deviation of the time zone
refers to the time zone of Germany.
alarm Function
The wake-up time is indicated in the wake-up display (7).
a) setting wake-up time
-
Keep the ALARM (5) button pressed for three seconds to access the wake-up
setup mode.
-
Set the wake-up time display using the UP (4) or DOWN (8) buttons.
-
Press briefly the ALARM (5) button and set the minutes indication of the wake-
up time using UP (4) or DOWN (8) buttons.
-
Press the ALARM button (5) again to save wake-up time settings.
b) activating/deactivating the alarm function
-
Press briefly the ALARM button (5) in order to activate or deactivate the alarm
function.
-
When the alarm function is activated, an ałarm icon (3) appears in the display
right upper part.
c) stopping the alarm signal
-
When the alarm sounds, press any button except for the SNOOZE/LIGHT button
(2) to turn off the alarm signal until the next day.
d) snooze function
-
When the alarm signal sounds, press the SNOOZE/LIGHT button (2) to activate
the snooze function.
-
After about five minutes the alarm signal will sound again.
-
The symbol "Zz" flashes in the display during this break.
The snooze function can be repeated up to seven times.
The alarm sounds maximum for two minutes.
ES = Spanish
IT = Italian
RU = Russian
EN = English
other Functions
-
Press the SNOOZE/LIGHT button (2) to turn on the clock face light for a few
seconds.
-
Press the MODE button (1) briefly to activate the calendar display. Press the
MODE button (1) again or wait for a few seconds to return to the normal time
display.
-
In case of chaotic indication or if nothing is displayed any more, press the RESET
button (10) with a sharp object (e.g., an unbent paper clip). The built-in micro-
processor is reset and the radio-controlled alarm clock goes back into DCF recep-
tion mode.
location For use
Select a level, flat and stable location for use.
Protect valuable furniture surfaces by using an appropriate underlay; otherwise, it
may cause scratches.
Set up the radio-controlled alarm clock to prevent it from falling.
To ensure correct DCF reception, the radio-controlled alarm clock should not be
placed next to electronic devices, cables, metal parts, etc.
maintenance and cleaning
The product does not require any maintenance and should never be disassembled
for any reason.
Please use a soft, dry, clean cloth for cleaning.
Do not use any chemical cleansers; those can change the colour of the plastic of
the case.
disPosal
a) Product
Electronic devices are recyclable waste materials and must not be disposed
of in the household waste!
Please dispose of the product, when it is no longer of use, according to the
current statutory requirements.
Remove the batteries that may be inserted and dispose of them separately
from the product.
b) batteries and rechargeable batteries
As the end user, you are required by law (Battery Regulation) to return used batter-
ies. Do not dispose of used batteries in the household waste!
Batteries/rechargeable batteries containing hazardous substances are la-
belled with the symbol shown to indicate that disposal in household waste is
forbidden. The symbols of the critical heavy metals are: Cd=cadmium,
Hg=mercury, Pb=lead (marking can be seen on the battery/rechargeable
battery, e.g., underneath the refuse bin symbol shown on the left).
You can return your used batteries/rechargeable batteries free of charge at the of-
ficial collection points of your community, in our stores, or at places where batteries
or rechargeable batteries are sold!
You thereby fulfil your statutory obligations and contribute to the protection of the
environment.
technical data
Operating voltage ....................... 3 V/DC
Batteries ....................................... 2x 1.5 V micro-cell (AAA)
Battery life ................................. approx. 2 years
Time protocol .............................. DCF
Snooze function .......................... 5 minutes
Alarm duration ............................ 2 minutes
Weekday display ......................... 8 languages
Time zone setup ......................... +/-12 h
Dimensions .................................. 127 x 57 x 42 mm
Weight ........................................... 88 g
declaration oF conFormity
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, 92240 Hirschau, hereby declare
that this product adheres to the fundamental requirements and the other relevant
regulations of Directive 1999/5/EC.
You can find the declaration of conformity for this product at
www.conrad.com
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com). All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems require the prior
written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© copyright 2015 by conrad electronic se.
Werbung
