SinusTEC ZV II Betriebsanleitung Seite 16

Choose a favorable position for the servomotor (B) close to the locking rod wich
connects the lock button with the door lock.
The direction of motion servomotor and locking bar should be as parallel as possible
in tandem.
Pull the connecting rod (D) through the eye of the servomotor and bend it so as to
provide easy connection with the locking bar.
Attach the control unit directly to the door by means of a drill template or one of the
enclosed rails with punched holes (G).
Move the control unit and the locking buttoninto unlocked position and adjust the
mounting brackets (E) on the connecting rod (D) according figures (figure 1) pinch off
the excess part of the rod.
Make sure that the window pane and the windermechanism do not come in contact
with the control unit during opening and closing. If the head of the door has no hole
or opening in it, drill a hole with approx 9 mm diameter.
back door
1
16
1 =locked
2
2 =unlocked
1
back door
2
1=locked
2=unlocked
front door
1 2
1
2
front door