ENG
MAINTENANCE
WARNING! Always disconnect power before attempting any maintenance or cleaning
to reduce the risk of fire, electric shock or damage to persons.
GLASS CLEANING
Glass is cleaned in the factory during the assembly operation. During shipment, installa-
tion, handling, etc., the glass may collect dust particles; these can be removed by dusting
lightly with a clean dry cloth. To remove fingerprints or other marks, can be cleaned with
a damp cloth. The glass should be completely dried with a lint free cloth to prevent water
spots. To prevent scratching, do not use abrasive cleaners.
RIGHT OF COMPLAINT
By law the product must be returned to the place of purchase along with the original
receipt in the event of a complaint. The user is liable for any damage to the product that
is caused by not using the product for its intended purpose or by not following this user
manual correctly. The right of complaint will not apply in these instances.
INFORMATION ABOUT HAZARDOUS WASTE
Used products should be handled separately from
household waste. They should be taken for recycling in
accordance with local rules for waste management.
8