The Heat Setting; Activation And Deactivation Of The Outer Rings; Automatic Heat Up - AEG Electrolux HK654070IB Benutzerinformation

• You spill something or put something on the control panel for more than 10 seconds, (a
pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove
the object or clean the control panel.
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off

The heat setting

The cooking zone
deactivates after
The heat setting
Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.

Activation and deactivation of the outer rings

You can adjust the surface you cook to the dimension of the cookware.
To activate the outer ring touch the sensor field
more outer rings touch the same sensor field again. The subsequent indicator comes on.
Do the procedure again to deactivate the outer ring. The indicator goes out.

Automatic Heat Up

You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the illustration),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch
, -
6 hours
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4
TEM.
( comes on in the display).
-
5 hours
/ . The indicator comes on. For
5 6 7 8 9 10 11 12 13 14
Operating instructions
-
4 hours 1.5 hours
23
-