Description Of The Device - Omnitronic BHD-02 Waist band amplifier Bedienungsanleitung

Do not shake the device. Avoid brute force when operating the device.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Do not permit operation by persons not qualified for operating the device. Most damages are the result of
unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void.

4. DESCRIPTION OF THE DEVICE

1. TONE-Control
2. POWER-Indicator
Glows green when the receiver is powered on. When this indicator glows red, change or load batteries.
3. MIC IN-Socket
Unbalanced ¼" jack socket for connecting your headset.
4. AUDIO IN-Socket
Unbalanced ¼" jack socket for connecting audio equipment.
5. RECHARGE-Indicator
Glows, when batteries are being recharged.
6. POWER SUPPLY
Plug in the adapter cable here.
7. POWER / VOLUME-Control
Turn this knob clockwise to turn on the amplifier and to ajdust the volume.
10/12 11038882_V_1_0.DOC