BTR ISDN-TE-Hub home 1/4 Bedienungsanleitung Seite 36

5. Mounting and startup procedure
The ISDN-TE-Hub home 1/4 is ready to start work without programming.
The integrated terminating resistors at the ISDN-TE-Hub home 1/4 input are
activated if necessary by setting the DIP switch on the pc board to position
"ON".
Note: BTR IT CONNECT ISDN-Adapters (P/N 130820-I) can be used as termi-
nating resistors in the wall outlets.
terminating resistors activated terminating resistors deactivated
(factory setting)
E15