BTR ISDN-TE-Hub home 1/4 Bedienungsanleitung Seite 33

5. Mounting and startup procedure
Connection of the ISDN S
The pair of terminal blocks assigned to S
input port and serves as an optional seperate ISDN S
installation cables or to extend the ISDN S
rules apply for such a connection (max. cable length 150 m). The S
tion offers a special feature, in case of power failure an auxiliary feeding by
the provider is possible.
Connect the port or ISDN S
1/4 to the ISDN connection.
Connection to power supply:
Plug the male connector of the power supply cable into the power supply
port of the ISDN-TE-Hub home 1/4, close the housing cover and plug the
power supply into a 230 V supply outlet. As soon as the ISDN-TE-Hub home
1/4 is powered the green LED lights up and the ISDN installation is ready to
start.
input:
0
0
bus terminal blocks of the ISDN-TE-Hub home
0
E12
is connected in parallel to the
0
bus connection by
0
bus. The normal ISDN installation
connec-
0