Swegon CASA Smart R3 Bedienungsanleitung Seite 95

goes dark, and Smart-functions and the
main menu symbols disappear. If the
"Function" is selected, a symbol corre-
sponds to the ventilation unit's operating
mode is shown.
• Screen saver delay. The value for "Screen
saver delay" defines how quickly the
screen enters standby mode if you do not
press any buttons.
• Reset display settings.
DIAGNOSTICS
From this menu you can check the data re-
lated to the function of the ventilation unit.
The various parts of the diagnostics are:
• Service reminder.
Service reminder
Service reminder
Service interval
Next service
Reset counter
Whether the service reminder will be in
use or not is defined from this menu,
and determines the length of the service
interval. The menu also displays the time
remaining before the next service interval.
The counter can be reset if you are servic-
ing the unit before the service interval time
has been reached.
• Temperature.
Temperature
Fresh air
Supply air before re-heater
Supply air
Extract air
Exhaust air
Room air
Display
Water radiator
Swegon reserves the right to alter specifications.
The temperature values shown in the
menu vary according to which sensors are
used in the unit.
Smart functions.
Smart functions
A+
AQ
RH
AH
AH setpoint
A+ control
RH control
AQ control
Smart control
6 m
The values shown in the menu vary according to
6,0 m
which Smart sensor is used in the unit.
The measurement values come from the
Smart sensors and the AH limit value is the
set limit for absolute humidity used by auto
humidity control, once boost starts.
The control information shows how much
different automatic Smart signals boost the
ventilation with respect to Home mode. The
"Smart
effect for all Smart functions.
• Fan
Fan speeds
Supply fan control
-12,2°C
Supply fan
11,8°C
Exhaust fan control
16,9°C
Exhaust fan
22,3°C
The menu shows the percentage values for
-0,2°C
control of the ventilation unit's fans and
rotation speeds of the fans.
21,8°C
21,8°C
23,0°C
www.swegonhomesolutions.com
control" value shows the total boost
speeds.
830 ppm
770 ppm
41 %
11,8 g/m 3
12,6 g/m
3
-3 %
0 %
4 %
1 %
60 %
1200 RPM
60 %
1200 RPM
EN
95