Ordering Spare Parts; Repair Service; Troubleshooting - Mantis 8570 Gebrauchsanweisung

Ordering Spare Parts

The following information should be provided when
ordering spare parts:
• Type of machine
• Item number of the machine

Troubleshooting

Caution! Before performing troubleshooting, switch off the tool and remove the battery.
Problem
Unit does not run
Blade cutter is running hot
Blade cutter will not move
Excessive vibrations/noise
Hedge trimmer operates
intermittently
Possible Cause
Lock off not fully operated
Blade cutter dull
Blade cutter has dent
Too much friction, due to lack of
lubricant
Machine defective
Machine defective
Internal wiring of machine damaged
On/Off switch defective
Contact us at www.mantis.uk.com

Repair Service

Repairs to electric power tools should only be carried out
by specialist electrical personel.
UK
Mantis UK Limited
Orchard House
Hempshaw Lane
Stockport
Cheshire SK1 4LH
Phone - 4401614741525
Europe
Mantis France SARL
20 rue des Garennes
57155 Marly
France
Tél 330387628888
Or contact your local Mantis authorised dealer.
Possible Solution
Check that lock off (9) is fully
forward prior to moving trigger
Have blade sharpened
Have blade inspected/ overhauled
Apply lubricant spray
Contact Service Agent
Contact Service Agent
Contact Service Agent
Contact Service Agent
17