Kenwood KDC-X5000BT Bedienungsanleitung Seite 12

BLUETOOTH®
Connect with a remote device by One-touch (NFC)
Near Field Communication (NFC) enables short-range
wireless communication between the unit and remote
devices.
By holding an NFC-compatible remote device near to the
N-Mark on the unit (volume knob), the unit and remote
device proceed to complete pairing and established the
BLUETOOTH connection automatically.
1
Activate the NFC function on the remote device.
Refer to the instruction manual of the remote device for
more information.
2
Hold the remote device near to the N-Mark on the unit
(volume knob).
The device vibrates when pairing is completed.
• To disconnect, hold the remote device near to the N-Mark
on the unit (volume knob) again.
• This unit only can recognize and connect to one NFC-
compatible device at a time.
10
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time.
( 11, Answer incoming call automatically)
During a call:
• The buttons and display illuminate according to the settings made for [DISPLAY].
( 17, 18)
• If you turn off the unit or detach the faceplate, the Bluetooth connection is
disconnected.
The following operations may differ or not available depending on the connected
phone.
To On the faceplate
First incoming call...
Answer a call
Press
buttons (1 to 6).
Reject a call
Press
End a call
Press
or the volume knob or one of the number
.
.