Kenwood BL330 series Bedlenungsanleitung Seite 7

Important
blender and mill
●
To ensure long life of your blender,
never run it for longer than 60
seconds or the mill for longer than
30. Switch off as soon as you've got
the right consistency.
●
Don't process spices – they may
damage the plastic.
●
The machine won't work if the
blender or mill is fitted incorrectly.
blender only
●
Don't put dry ingredients into the
blender before switching on. If
necessary, cut them into pieces;
remove the filler cap; then, with the
machine running, drop them through
one by one. Keep your hand over
the opening. Empty regularly.
●
Don't use the blender as a storage
container. Keep it empty before and
after use.
●
Never blend more than 1 litre (1
pints) – less for frothy liquids like milk
shakes.
mill only
Use for dry ingredients only.
hints
●
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Then, with the machine
running, pour the oil into the filler cap
and let it run through.
●
Thick mixtures, eg pâtés and dips,
may need scraping down. If it's
difficult to process, add more liquid.
●
When crushing ice, add 15ml
(1 tbsp) water to 6 ice cubes.
Operate the blender in short bursts.
to use your mill
1 Put your ingredients into the jar. Fill it
no more than half full.
2 Fit the sealing ring into the blade
unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down.
4 Screw the blade unit onto the jar
until it's finger-tight.
5 Place the mill onto the power unit
and turn to lock.
6 Switch on.
7 After milling, you can replace the
blade unit with the sprinkler lid and
shake out your food.
●
The sprinkler lid is not airtight.
cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Never let the power unit, cord or
plug get wet.
3 ⁄
4
●
Empty the jug before unscrewing it
from the blade unit.
●
Don't wash any parts in your
dishwasher.
power unit
●
Wipe with a damp cloth, then dry.
●
Push excess cord inside the back of
the machine.
blade unit
1 Remove and wash the sealing ring.
2 Don't touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don't immerse the blade
unit in water.
3 Leave to dry upside down, away
from children.
other parts
Wash by hand, then dry.
3