Kenwood KAH358GL Bedienungsanleitungen Seite 5

Ensure the goblet is securely attached to
G
the base and when removing from the
appliance, guide the base and ensure it is
removed together with the goblet.
Ensure that the lid and filler cap are
G
securely in place before every blending
operation.
Always ensure that the vents in the filler
G
cap are clear before every blending
operation
When fitting the lid to the goblet always
G
ensure that the lid and goblet rim are
clean and dry to ensure a good seal and
prevent spillage.
This appliance conforms to EC
G
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
Use the blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice.
before using your Kenwood
attachment for the first time
Wash the parts: see 'cleaning'.
key
filler cap
lid
goblet
blade unit with sealing ring
base
vents
stir stick
.
to use your blender
1 Fit the blade unit
2 Then screw the goblet onto the
3 Put your ingredients into the
4 Fit the lid by pushing down until
5 Place the filler cap into the lid and
6 Remove the high speed outlet
7 Place the blender over the outlet,
8 Switch to the required speed (refer
9 Once the desired consistency has
5
.
base – ensuring the blade base is
fully tightened
goblet.
secure. (Ensure one of the
protrusions on the lid fits over the
spout on the goblet.)
push down to secure.
cover .
turn clockwise and at the same
time push down until the unit
engages . Then turn further
clockwise until the attachment
locks into position.
to the recommended usage chart).
been achieved, switch off and
remove the blender supporting it
with both hands.
into the base
.