Küppersbusch IKE1970-1 Benutzerinformation Seite 22

22
2. Install the appliance in the niche.
Push the appliance in the direction of
the arrows (1) until the upper gap cover
stops against the kitchen furniture.
Push the appliance in the direction of
the arrows (2) against the cupboard on
the opposite side of the hinge.
3. Adjust the appliance in the niche.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
The lower hinge cover (in the accesso-
ries bag) makes sure that the distance
between the appliance and the kitchen
furniture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
4mm
44mm
4. Attach the appliance to the niche with 4
2
1
5. Remove the correct part from the hinge
Open the door. Put the lower hinge
cover in position.
screws.
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
I