Herunterladen Inhalt Inhalt Diese Seite drucken

Control Panel; Temperature Indicator - Küppersbusch ITE139-0 Gebrauchs- Und Montageanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Control Panel

A.
On/OFF light
B
ON/OFF button
C
Temperature setting button (warmest)
D

Temperature indicator

E
Temperature setting button (coldest)
F
Super frost light
G
Super frost button
H
Alarm reset light
I
Alarm reset button
C - E Temperature setting buttons
The temperature can be adjusted between -15°C
and -24°C.
By pressing the button (C or E), the current
temperature setting flashes on the indicator. It is
possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature,
press button (C). To set a colder temperature, press
button (E). The indicator display the newly selected
temperature for a few seconds and then shows
again the inside compartment temperature.
The newly selected-temperature must be reached
after 24 hours.
Attention!
During the stability period by the first starting the
temperature displayed can not correspond to the
setting temperature. During this time it is possible
that the temperature displayed is lower than the
setting temperature.
+
A
B
C
-
D
E
F
G H
A. Light ON/OFF
B. Button ON/OFF
ON:
Press the button (B). The pilot light (A)
switches on.
OFF: Keep press the button (B) until the pilot light (A)
and the temperautre indicator switched off.
D. Temperature indicator
During normal functioning the indicator shows the
warmest temperature inside the freezer.
Difference until 5°C inside the compartment are
quite normal.
Attention!
Difference between the temperature displayed and
temperature setting is normal. Especially when:
-
a new setting has recently been selected
-
the door has been left open for a long time
-
warm food has been placed in the compartment
F. Super frost pilot light
G. Super frost button
To freeze fresh foods, the "Super frost" function must
be actived. Press the super frost button (G).The
relevant pilot light (F) switches on
The function can be deactived at any time, by
pressing the button (G), otherwise it automatically
switched off. With deactived functionth pilot light (F)
switches off.
I
11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ite 139-0

Inhaltsverzeichnis