Lenze EPM-H310 Betriebsanleitung Seite 55

Terminal assignment
(
Stop!
Connect a 120 W terminating resistor to the first and last bus device.
Terminal
1
2
3
4
5
For trouble−free operation, use cables with the listed specifications:
Cable specifications
Overall length
Cable type
Cable resistance
Capacitance per unit
length
EDBPM−H310 DE/EN/FR 7.1
Identification Explanation
V− GND
CAN− LO
Shield
CAN+ HI
n.c.
£ 300 m
LIYCY 2 x 2 x 0.5 mm
(twisted in pairs and shielded cores)
£ 80 W/km
£ 130 nF/km
l
Electrical installation
Wiring of the system bus (CAN)
Reference potential
System bus LOW (data line)
Connect the shield of the system bus cable
System bus HIGH (data line)
Not connected
£ 1000 m
2
CYPIMF 2 x 2 x 0.5 mm
(twisted in pairs and shielded cores)
£ 80 W/km
£ 60 nF/km
4
2
53