Preface And General Information; About These Operating Instructions; Terminology Used; Scope Of Supply - Lenze EPM-H310 Betriebsanleitung

1

Preface and general information

The EPM−H310 operating unit enables you to access codes of Lenze controllers,
9300 Servo PLCs and Drive PLCs and to control them easily. Communication
takes place via the system bus (CAN).
The »HMI Designer« is a powerful development environment for creating
projects containing the configuration of the operating unit.
1.1

About these Operating Instructions

These Operating Instructions describe safe and trouble−free working on
ƒ
and with the EPM−H310 operating unit.
All persons working on and with the EPM−H310 operating unit must have
ƒ
these Operating Instructions available and observe all relevant
information and notes.
These Operating Instructions must always be kept as a complete
ƒ
document and in a readable state.
1.2

Terminology used

Term
Controller
HMI
1.3

Scope of supply

Scope of supply
l 1 EPM−H310 operating unit
1 Operating Instructions
l
2 mounting clamps
l
l 2 screws
1 seal
l
1 terminal strip, 4−pole for connection of DC
l
voltage supply
l 1 terminal strip, 5−pole for system bus (CAN)
connection
EDBPM−H310 DE/EN/FR 7.1
Preface and general information
About these Operating Instructions
Used in this text for
Lenze 8200 vector and 9300 vector frequency inverter, Lenze 9300
and 9400 servo inverter
Human Machine Interface
Important
After receipt of the delivery, immediately check
whether the items delivered match the
accompanying papers. Lenze does not accept
any liability for deficiencies claimed
subsequently.
Claim
visible transport damage immediately to the
l
forwarder.
visible deficiencies/incompleteness
l
immediately to your Lenze representative.
l
1
41