Whirlpool WM1650 A+W Bedienungsanleitung Seite 4

Refrigerator compartment controls (depending on the model)
B A
F G H
A. Display indicating the set temperature. If the
display indicating the set temperature blinks,
contact the After-sales Service.
B. ON/OFF button.
C. Temperature selection button.
D. Fast Cooling button. The function switches off
automatically after approximately 6 hours.
The vacation mode reduces energy consumption when the user is away for a prolonged period. The function is activated
by pressing the button indicated on the product sheet (the green LED must light up). Repeat the operation to restore
normal refrigerator compartment operation. After activating the function, remove perishable food from the refrigerator
compartment and keep the door closed, since the refrigerator maintains an adequate temperature to avoid odours.
The refrigerator can operate at ambient temperatures be tween +10°C and +38°C. Optimal performance is obtained
at temperatures between +16°C and +38°C.
Note: Ambient air temperature, the frequency of door opening and the position of the appliance can affect the internal
temperatures of the refrigerator. These factors must be taken into account when setting the thermostat.
Fan with a button
The fan gives more even temperature distribution inside the refrigerator compartment, allowing better preservation of
stored food.
To switch on the fan press the button (10a). It is advisable to activate the fan when the ambient air temperature is over
27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions.
Note: Do not obstruct the air intake area with food items. (10a)
The fan will run ONLY when the compressor is in operation.
Remember to turn off the fan when there is a lower ambient air temperature.
Removing the light bulb
1. Unscrew the light bulb as shown in the figure.
5019 635 01014
D
C
E D
How to replace the light bulb
1.
2.
3.
GB F NL E P
E. Fast Cooling function activated.
F. Vacation" function activation button": for
prolonged disuse.
G. Vacation" function activation indicator".
H. "6th Sense" activation LED (blue)/
"Dynamic Intelligence" (if provided).
Indicates that the "6th Sense"/"Dynamic Intelligence"
function is active (see paragraph "6th Sense function"/
"Dynamic Intelligence").
Loosen the screw and remove the lamp cover.
When replacing the bulb, bear in mind that this
appliance is fitted with a special bulb (15W with
bayonet fitting); to replace do not unscrew, but pull
towards the inside of the appliance (as indicated by
the arrow).
Refit the lamp cover and secure it with the screw.
I GR S N DK FIN