Hmg 2500, Hmg 30X0 Und Hmg 4000; Software Cmwin; Important Tips At A Glance - HYDAC AS 1000 Benutzerhandbuch

Aqua Sensor AS 1000

11.3 HMG 2500, HMG 30X0 und HMG 4000

Portable data recorders with a colour display with full graphics capability to display or
record measured values from the AS 1000.
With each HMG the actual measured values can be shown on the display. The recordings
can also be stored and processed on the HMG 2500 / 30x0 or 4000 (for a detailed
description, see the operating manual for the corresponding HMG).
Connecting to an HMG 2500, HMG 30X0 or HMG 4000
Remove the supply cable from the electrical connection of the AS 1000 and screw the
connection adapter "ZBE 36" or „ZBE 46" onto the sensor.
Connect one of the inputs A .. C of the HMG 2500 or A .. H of the HMG 30X0 or HMG
4000 to the output of the "ZBE 36" or „ZBE 46" by means of the sensor cable "ZBE 30-0x".
When connecting to a HMG the power supply of the sensor is ensured via the measuring
device.
HMG 4000

11.4 Software CMWIN

A specially developed PC software, communicating with AS 1000 via a communication
bridge (HMG 510, HMG 2500, HMG 30X0 or HMG 4000). Using this software,
measurement curves can be transferred to the PC, stored, displayed and processed or the
actual measured values can be displayed.
CMWIN is supplied with the HMG 510, HMG 2500 and HMG 4000.

12 Important tips at a glance

• For hydraulic applications, we recommend that the sensor is installed in a vertical
position with the mechanical threaded connection pointing upwards.
• When installing, ensure that the sensor is completely submerged in the fluid and that
the fluid can circulate freely through the sensor.
• Ensure there is constant flow and as far as possible, prevent air bubbles from
forming. With standing oil, variations in measurement may increase.
Edition: 2017-07-17
HMG 2500 / 30X0
HYDAC ELECTRONIC GMBH
15
E
Part No.: 669705