Introduction; Proper Use; Product Description (Fig. 1-7); Scope Of Delivery - Scheppach Ixes Hda-14 Originalbetriebsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Failure to comply with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failures of the electrical system due to failure to
observe the national electrical requirements and
regulations
Note:
The operating manual is part of the product and contain
important information for safe, proper and economical
operation. Please also observe the applicable national
regulations. Read all operating and safety instructions
carefully before use and only use the product as de-
scribed. Keep the manual and pass it on when you give
the product to someone else.

2. Proper use

Only use the air filter for wood dust. Materials such as
liquids, metal chips, metal dust, screws, glass, plas-
tic or stones can cause sparks and/or damage if they
come into contact with any part of the machine.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
In addition, the applicable accident prevention regula-
tions must be strictly observed.
18 | GB
Other general occupational health and safety-related
rules and regulations must be observed.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the product.
The product may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specifications of
the manufacturer, as well as the dimensions specified in
the technical data, must be observed.
Please note that our products were not designed with the
intention of use for commercial or industrial purposes. We
assume no guarantee if the product is used in commercial
or industrial applications, or for equivalent work.
The manufacturer is not liable for damage caused by
improper use or incorrect operation.

3. Product description (Fig. 1-7)

1. Control panel
2. Rear cover
3. Clip bolt
4. Nut
5. Remote control
6. External filter
7. Internal filter

4. Scope of delivery

Item Quantity
1x
3 4x
4 4x
5 1x
6 1x
7 1x
4x
4x
1x

5. Unpacking

• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
www.scheppach.com
Designation
Heavy Duty Air Filter
Clip bolt
Nut
Remote control
External filter
Internal filter
Ceiling installation clip bolts
Chain
Operating manual