Troubleshooting - Klarstein Airakles Bedienungsanleitung

EN
28

TROUBLESHOOTING

Problems Reasons
This product has a save
lock, if the glass jug
is not put on the base
appropriately, the
blender cannot work
Blender cannot
work
This product has
overheating protection
system, if the blender is
too hot, the system will cut
the power automatically.
Blade blocked Too much food in
the glass jug.
Motor has It is normal
bad smell in
several uses at the
beginning
Too much food in
the glass jug
Machine noise
heavy, bad,smell,
burning hot,
Machine overworking
smoking
without stop.
The seal ring is not
correctly put on the
blade, or the blade is
not correctly installed or
Blender leakage
locked on the glass jug.
The raw material in
the glass jug over the
MAX indication
Solutions
Pull out the plug, check the
glass jug if install appropriately
Pull out the plug, let the blender
cool down 30 minutes, then
plug in the power again,
press the function buttons to
see if the blender still works.
Pull out the plug, pour
out some food material
and restart again..
If after used for many times,
blender still have bad smell,
you should check if you over
put the food inside, and over
the max working time..
Pull out the plug, pour
outsome food, and process
with small amounts.
DO NOT let the blender
continuously working
more than 1 minute.
Pull out the plug, put the seal
ring correctly on the blade,
and correctly installed the
blade on the glass jug
Pull out the plug, pour out
some food, and process
with small amounts.