Bluetooth Mode - Hyperx Cloud Flight 2 Schnellstartanleitung

ENGLISH
Overview
A - Mic mute / monitoring button
B - Status LED
C - Power button
D - USB-C charge port
E - Microphone port / internal microphone
F - Multifunction button
G - Volume wheel
H - Wireless mode switch
I - Removable earcup plates
Charging
It is recommended to fully charge your headset before rst use.
CHARGE STATUS
Fully Charged
61% — 99%
21% — 60%
< 20%
Usage
Adapter Mode (2.4GHz)
1. Slide the headset wireless mode switch to [
2. Connect the USB wireless dongle to your device.
3. Power ON the headset.
OMEN Gaming Laptop
1. Power on the gaming laptop.
2. Power on the headset. The headset will automatically connect to the gaming
laptop. *
NOTE: After the headset is paired, double press the power button to switch
between OMEN gaming laptop connection or the USB wireless dongle
connection.
*Supported only on compatible OMEN Gaming Laptops.
**Laptop shown for illustration purposes only.

Bluetooth Mode

1. Slide the wireless mode switch to [
The headset will enter Bluetooth pairing on the rst setup.
2. Go to your device Bluetooth settings, search, and connect to "HyperX Cloud
Flight 2 Wireless".
Bluetooth Pairing
1. Slide the wireless mode switch to [
J - Customizable RGB lighting
K - Detachable microphone
L - Microphone mute LED
M - USB wireless dongle
N - Dongle status LED
O - Pairing pin hole
P - USB-C to USB-A adapter
Q - USB charge cable
STATUS LED
Solid Green
Breathing Green
Breathing Yellow
Breathing Red
].
].
].
2. Press and hold both the power button and the multifunction button for 2s.
Pairing mode is active when the LED blinks blue and the voice prompt says,
"Bluetooth pairing".
3. Go to your device's Bluetooth settings and connect to "HyperX Cloud Flight 2
Wireless".
Setup
Windows 11
1. Right-click on the sound icon in the system tray and select Sound Settings.
2. Set the output device to Headphones [HyperX Cloud Flight 2 Wireless].
3. Set the input device to Microphone [HyperX Cloud Flight 2 Wireless].
PlayStation 5
Go to the home page and select Settings > Sound.
Microphone
Input Device: USB Headset "HyperX Cloud Flight 2 Wireless".
Audio Output
Output Device: USB Headset "HyperX Cloud Flight 2 Wireless".
Output to Headphones: All Audio.
Headset Controls
Status LED
STATUS ADAPTER MODE
Pairing Fast blinking white
Searching Blinking white
Connected Solid-fade white for 5s
Power button
Power on/o – Hold button for 2 seconds to power headset on/o .
Battery level status – Press button to check the battery level.
The status LED will automatically turn o to conserve battery life.
BATTERY LEVEL
61% to 100%
21% to 60%
10% to 20%
< 10 %
Connection switch – When paired with OMEN gaming laptops, double press
button to switch between OMEN gaming laptop connection and USB wireless
dongle connection.
Mic mute / mic monitoring button
Mic mute toggle – Press button to turn the mic mute on/o .
BLUETOOTH MODE
Fast blinking blue
Blinking blue
Solid-fade blue for 5s
HEADSET STATUS LED
Solid-fade green
Solid-fade yellow
Solid-fade red
Short-blink red