Headset Controls - Hyperx Cloud Flight 2 Schnellstartanleitung

Setup
Windows 11
1. Right-click on the sound icon in the system tray and select Sound Settings.
2. Set the output device to Headphones [HyperX Cloud Flight 2 Wireless].
3. Set the input device to Microphone [HyperX Cloud Flight 2 Wireless]
PlayStation 5
Go to the home page and select Settings > Sound.
Microphone
Input Device: USB Headset "HyperX Cloud Flight 2 Wireless".
Audio Output
Output Device: USB Headset "HyperX Cloud Flight 2 Wireless".
Output to Headphones: All Audio.

Headset Controls

Status LED
STATUS ADAPTER MODE
Pairing Fast blinking white
Searching Blinking white
Connected Solid-fade white for 5s
BLUETOOTH MODE
Fast blinking blue
Blinking blue
Solid-fade blue for 5s
Power button
Power on/o – Hold button for 2 seconds to power headset on/o .
Battery level status – Press button to check the battery level.
The status LED will automatically turn o to conserve battery life.
BATTERY LEVEL
61% to 100%
21% to 60%
10% to 20%
< 10%
Connection switch – When paired with OMEN gaming laptops, double press
button to switch between OMEN gaming laptop connection and USB wireless
dongle connection.
Mic mute / mic monitoring button
Mic mute toggle – Press button to turn the mic mute on/o .
Mic monitoring toggle – Hold button for 2 seconds to toggle mic
monitoring on/o .
Multifunction button
SINGLE PRESS DOUBLE PRESS
Skip Track
Play / Pause
End Call
Answer Call
Reject Call
Note: Button functionality can vary between devices and apps.
Volume wheel
Scroll wheel to adjust volume level.
RGB lighting
Press both power and multifunction buttons to toggle RGB LEDs on/o . *
*Software required to customize RGB colors and lighting e ects.
HEADSET STATUS LED
Solid-fade Green
Solid-fade Yellow
Solid-fade Red
Short-blink Red
TRIPLE PRESS LONG PRESS 2S
Activate Voice
Previous Track
Assistant