Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; A) Connection; Electrical Connection - Renkforce RF-IR-RETRO1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

"Device"
Use this option to rename the internet radio for the DLNA function. Select the menu option "Rename (AirMusic)". To
enter, proceed as for the password, as described in chapter 9, "Initial Set-up".
"Equalizer"
Select this option to configure the equaliser settings. "Normal, Flat, Jazz, Rock, Soundtrack, Classical, Pop, News" are
available. These settings can also be switched directly during playback with the EQ button (R).
"Resume When Power On"
Use this option to select whether you wish to continue to play automatically or not ("on" or "off").
"Software update"
As soon as you open this menu option, it checks whether a new software is available for the internet radio. The display
shows if an update is available. You can then start the update.
"Reset to Default"
• Use this menu option to reset the internet radio to the factory settings. After selecting the option, confirm with "Yes"
or "No".
"Local Radio"
The radio stations in your local area will be displayed if this option is selected.
The following menu options are available when you press the
-> Auto scan -> Play
"Add to Favourites"
Confirm a selected radio station while it is being played and save it in the Favourites as described in the chapter
"10 c) Add station to Favourites".
"Auto scan"
This activates the auto scan mode. A station is searched, a connection is established automatically and the station is
played for a short time. This procedure is repeated for the next station.
"Play"
The playback of the current /referred station starts on confirming with the OK button (N) or pressing the
DIAL/SELECT (3) button of the device.
Press the
transported, and the available media information is displayed by pushing this button, e.g. bit rate, track, the
name of the title or artist etc.

8. Operation

a) Connection

Electrical connection

• To start operating the device, insert the power adapter into a mains socket.
• Connect the output plug of the power adapter to the input jack for the power supply (15) at the rear of the radio.
• The internet radio is ready for use.
38
(O and 5) button while a station is playing. The stream meta-information of the station is
(O and 5) button from station name: Add to Favourites

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis