Introduction; Explanation Of Symbols - Renkforce RF-IR-RETRO1 Bedienungsanleitung

1. Introduction

Dear customer,
Thank you for purchasing this product.
This product complies with statutory national and European requirements.
To maintain complicity and for safety reasons, always follow the instructions in this manual!
These operating instructions are part of this product. They contain important information on setting up and
using the product. Also consider this if you pass on the product to any third party. Therefore, retain these
operating instructions for reference!
If there are any technical questions, please contact:
International: www.conrad.com/contact
United Kingdom: www.conrad-electronic.co.uk/contact

2. Explanation of symbols

The symbol with the lightning in the triangle indicates that there is a risk to your health, e.g. due to an
electric shock.
This symbol with the exclamation mark is used to highlight important information in these operating
instructions. Always read this information carefully.
This arrow symbol indicates special information and advice on how to use the product.
This symbol indicates that this product is built according to protection class II. It is equipped with reinforced
or dual insulation between the mains circuit and the output voltage.
This product must only be used and operated in dry, enclosed indoor areas. It must not become damp or
wet, as this may result in a fatal electric shock!
27