Renkforce RF-IR-RETRO1 Bedienungsanleitung Seite 36

"Set time format"
• Choose between 12 or 24-hour format.
"Setting the date format"
• Choose the desired date format. Choose from the following options: DD/MM/YYYY (day/month/year) (standard);
YYYY/MM/DD (year/month/day); MM/DD/YYYY (month/day/year).
"Alarm"
These sub-menu options are available in the menu: Alarm 1 (Off) -> Alarm 2 (Off) -> Nap Alarm (Off) -> Alarm volume
"Alarm 1 (Off)"
All settings for Alarm 1 are here. Chapter "10 f) Alarm clock" in this user manual explains how to proceed. If an alarm
has been set, it is shown as time in brackets instead of "OFF".
"Alarm 2 (Off)"
All settings for Alarm 2 are here. Chapter "10 f) Alarm clock" in this user manual explains how to proceed. If an alarm
has been set, it is shown as time in brackets instead of "OFF".
"Nap Alarm (Off)"
In this menu option, simply select a time period after which the radio should wake you. However, only a "beep" is
possible here as an alarm tone. Settings available for time: 5, 10, 20, 30, 60, 90 and 120 min. If a nap setting exists,
it is displayed as a time period in brackets instead of "OFF".
"Alarm volume"
Use this option to set the alarm volume. The volume settings apply to all alarms of the device. An alarm goes off when
the pre-set time has elapsed. The clock symbol blinks in the LC-display (2). To end the alarm, press the OK button (N)
or the knob (3) of the device or another button.
"Timer"
Adjust the duration of the timer. For this, push the (O and 5) buttons or (G and 6) button. Press and hold to scroll
through the numbers more quickly. You can select a time of up to 100 minutes in intervals of seconds.
Press the OK button (N) or the knob (3) of the device to start the timer, or to again stop after starting.
To exit the timer mode, press the (G and 6) buttons. The timer continues.
"Language"
Use this option to select the menu language. The following languages are supported:
English, German, Spanish, French, Portuguese, Dutch, Italian, Russian, Swedish, Norwegian, Danish, Hungarian,
Czech, Slovene, Polish, Turkish, Finnish
"Dimmer"
These sub-menu options are available in the menu: Power saving -> Turn On
"Power saving"
In the power saving mode the LC display dims automatically to save energy if the Internet radio does not work/ is not
active for a certain period of time.
36