Holding Pressure; Refrigerant Filling; Accessories; Customer Service - Rothenberger Rocool Maxi Bedienungsanleitung

3.2.2

Holding pressure

 Turn on the device and press the Mode button to enter the HOLD PRESSURE inter-face.
 Fill the system to be tested with an appropriate amount of nitrogen. When the pres-sure
reaches the set point, close the valve on the high pressure side.
 Press the Start/Stop button to start the holding pressure test.
3.2.3

Refrigerant filling

 Turn on the device and press the Mode button to enter the interface for the PT.
 Connect the refrigerant tank to the middle interface.
 Close the high-pressure valve and open the low-pressure valve.
 Open the valve of the refrigerant line to fill refrigerant.
4

Accessories

You can find suitable accessories in the main catalog or at www.rothenberger.com
5

Customer service

The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO SERVICE+
online:  + 49 (0) 61 95/ 800 8200 sf + 49 (0) 61 95/ 800 7491  service@rothenberger.com -
www.rothenberger.com
10 ENGLISH