Temperature Measurement - Hikmicro B01S Schnellstartanleitung

English
Button Function


Exit the menu or return to previous menu.
In menu mode: Press
parameters.
In live view mode: Press
(only supported by certain models). Press
switch palettes.
Charge Camera
The camera is equipped with a built-in battery. It is recommended to
charge the camera with the included USB cable and the Type-C
interface on camera. The power adapter (not included) should meet
the following standards:
Output Voltage/Current: 5 VDC/2 A

Power Output: 10 W

The power delivered by the charger must be between min 6.7 Watts

required by the radio equipment, and max 10 Watts in order to
achieve the maximum charging speed.
Note

Temperature Measurement

You should first set target
before measuring temperatures. Refer to the user manual for
more information.
3
Hold: Power On/Off
Press: Display menu or confirm operation or change
direction when setting User-defined Spot.
If the camera is not in use for an extended period and is
over-discharged, it is recommended to charge for at least
30 min before powering it on.
It is recommended to use the USB cable included in the
package for both charging and data transfer.
and
to switch image modes
Emissivity and
to select
to
Distance and