Activate Your Bike; Charging The Battery Pack - Propain Ekano 3 Al Aufbauanleitung / Betriebsanleitung

// ACTIVATE YOUR BIKE

1. Turn on the bike.
2. Install the Avinox Ride app on your smartphone.
3. Follow the process on your screen or smartphone.
Key points:
• Activation is required only once.
• Firmware updates are often performed right after activation.
• Assistance levels can then be configured in the app.
• Service intervals and error codes are also managed through the app.
• Assistance levels can be customized in the app, and custom levels can be created.
• You can save your chosen cassette in the app to optimize your riding performance.
Scan the QR code to view the Avinox manual, which provides
additional information.

// CHARGING THE BATTERY PACK

WARNING
HOT SURFACES ON THE CHARGER CAN CAUSE BURNS!
Do not touch the charger during charging or immediately afterward.
Let the charger cool down completely before touching it.
Before charging and using the battery pack, read the user manual of the battery pack!
1. Remove the dust cap from the charging connector.
2. Connect the charger to the charging socket of the battery pack and connect the charger to a mains
socket.
→ The LED on the charger will glow red while charging.
→ The battery is fully charged when the LED on the charger is green.
// ASSEMBLY INSTRUCTIONS 63