Alarm Mode - Grundig Music 81 Bedienungsanleitung

ALARM MODE

Alarm with signal tone
1
Press »ON/OFF« to switch on the device.
2 To set the alarm signal to signal tone (»
press »ALARM« until »
play.
– After a short time, the display changes to the
current time, » « remains constant.
e
3
Briefly press »ALARM« to check the alarm
time.
– Display: the set alarm time and »
– After a short time, the display changes to the
current time, » « remains constant.
e
– The alarm goes on with a signal tone at the
set time.
Alarm with radio station
1 Press »ON/OFF« to switch on the device.
2 FM MW
Move »
● ●
frequency band.
3
Select the desired station using the station but-
tons »1/6« till »5/10« (press once: presets
1 to 5, press twice: presets 6 to 10).
4 Adjust the alarm volume using
5
Press »ON/OFF« to switch off the device.
6 Select the radio alarm (»
»ALARM« until »
§
– After a short time, the display changes to the
current time, » « remains constant.
e
7 Briefly press »ALARM« to check the alarm
time.
– Display: the set alarm time and »
– After a short time, the display changes to the
current time, » « remains constant.
§
– The selected radio station switches on at the
set alarm time.
_______________________________________________________
e
« appears in the dis-
e
«.
e
LW SW« to select the
● ●
»– VOLUME
«) by pressing
§
« appears in the display.
«.
§
Briefly displaying the alarm time
1
With the device switched on, briefly press
»ALARM«.
«),
– The display changes from the frequency or
station name to the set alarm time.
– Display: »
– After a short time, the display changes back
to the frequency or station name;
or
with the device switched off, press
PLAY«.
– The display changes from the current time to
the set alarm time.
– Display: »
– After a short time, the display switches back
to the current time.
Interrupting the alarm
1
Press »SNOOZE« while the alarm is sounding.
– Display: »
– The alarm (signal or radio) stops.
– The alarm goes on again at 5-minute inter-
vals (the total alarm time is 90 minutes).
Cancelling the alarm for the day
+«.
1 Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »
– The alarm (signal tone or radio) stops, but the
alarm function remains activated for the next
day at the set time.
Deactivating/activating alarm stand-
by
1
To deactivate alarm stand-by, press »ALARM«
until » « or »
e
play.
– The set alarm time is saved.
2
To activate alarm stand-by, press »ALARM«
until » « or »
e
« or » «.
§
e
« or » «.
§
e
« or » « flashes.
§
e
e
« no longer appear in the dis-
§
« appear in the display.
§
ENGLISH
»DIS-
« or » «.
§
21