Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick Start
Power Outlet
If your computer is equipped with USB and uses the Windows
you want to operate the monitor's user controls using your system, you can install USB
support by using the following procedure. To attach the USB port on your MultiSync
FP
™
monitor to a USB port on your system:
1350X
1. Using the supplied USB cable, connect the USB Series B connector end to the USB
upstream port on the monitor (Figure 1).
2. Connect the other end of the supplied cable to the USB downstream port on the
computer (or to a USB Hub attached to the computer) (Figure 1).
3. Install the supplied Monitor Control Software.
USB downstream port
7A811011.WPC
cont.Start
Power
Cord
Figure C.1
DVI/D-SUB
MultiSync
EXIT
PROCEED
RESET
DVI/D-SUB
Figure D.1
Figure 1
5
7
Power Button
®
98 operating system and
®
USB upstream port
USB Series B
connector end
5/18/00, 12:26 PM
Werbung
Inhaltsverzeichnis
Fehlerbehebung
