Sagem PHOTO EASY 110 Anleitung Seite 14

Liasse azur PE110_En.fm Page 4 Vendredi, 17. mars 2006 11:24 11
C
ONNECTIONS
Master USB, WiFi key*
Pictbridge, Bluetooth key*
*Optional
O
PERATING
Check that the consumables (paper and ribbon) are installed.
Ensure that your printer is connected to the mains supply.
Connect your equipment, containing your files to be printed, to one of the USB ports or place the device fitted
with IRDA close to the IRDA port on your printer so that it will be detected automatically.
- For WiFi key, Pictbridge and Bluetooth key connections, files are transferred automatically as soon as the
connected devices are recognised.
- For the IRDA link, check that the IRDA port on the transmitting device is activated. Move the transmitting
device close to the IRDA port on the printer. As soon as it is recognised, transfer will begin.
- From a PC, print from the control panel used with your print utility or software. Select "A6 Photo Printer" to
print your photos.
When transferring data and during printing, the indicator located on the top of the printer flashes green.
Once transfer is complete, printing starts automatically.
S
ETTINGS
You can improve print quality using the "Crystal Image" and "Red-eye" functions.
Crystal Image makes all the necessary settings and corrections related to picture sharpness, colour
management and contrast automatically to obtain the best print quality possible.
Furthermore, exposure defects will be corrected (for example, under-exposed photos will be made lighter or
the portions of photo with strong contrasts will be compensated for). The red-eye correction function touches
up "red eyes" on shots taken with the flash.
These functions must be activated before transfer to the printer.
To activate these functions, press the green key located on the top of the printer as
explained in the following sequence.
Press the green key once. The icon
function is activated.
Press the green key again. The icons
Image" and "Red-eye" functions are activated.
Press the green key again. The icon
and the "Red-eye" function is activated.
Press the green key again. The icons
functions are disabled.
lights up and the "Crystal image"
and light up and the "Crystal
goes off and the icon
and are no longer lit and the "Crystal Image" and "Red-eye"
- 4 -
Infrared
IRDA port
Slave USB
PC LINK
lights up