Siemens TK76K572 Gebrauchsanleitung Seite 34

start stop ( 8 ) again to cut the
process short.
DrТОН mТХФ rОsТНuО Тs НТПi МuХt tШ
1.
2. Hot water with the
rotary knob
Hot water
3 . > ( 3 ) to switch to the tem-
perature selection. Set the required
temperature with the rotary knob
Hot water
)
4. start stop ( 8 ) ; hot water runs
out of the milk frother outlet for about 40
seconds.
Press start stop ( 8 ) again to cut the
process short.
)
–
+
–
+
i ( 7 ) to display information ( p ress
ЛrТОl в) КЧН КНУust sОttТЧРs (СШХН НШаЧ ПШr Кt

sТЧМО tСО КppХТКЧМО аКs i rst put ТЧtШ

Information/Service
....................................................................................
Descale after
i ( 7 ) for at least 3 seconds;
the different setting options are then
displayed:

Default settings
Language:
English
< and
the different setting options. The currently
active setting is always highlighted in white.
You can change the setting that is currently
displayed by turning the rotary knob
ЧШt ЧОМОssКrв tШ МШЧi rm tСОm
(7) ЛrТОl в) вШu
i
140 cups
Press start
> ( 3 ) to switch between