Disposal - Heiniger Style Mini Betriebsanleitung

Disposal

Dis pos al
This device is marked in accordance with the 2002/96/EC
guidelines for electrical and electronic equipment (WEEE).
At the end of its service life, this electronic device may not be
disposed off through the normal household garbage/domestic
waste but must be delivered to the collection point for recycling electrical and
electronic devices.
This also applies for electronic devices which were not used recently for
private purposes e.g. for commercial or business purposes.
To the extent, acceptance of electronic devices not used privately is excluded
by the competent local disposal facilities, the waste information centre gives
information about environmentally compatible disposal.
The symbol on the product, the manual or the packaging refers to the same.
Material can be reused according to their marking. Reuse, recycling or other
forms of use of old equipment make a significant contribution towards
environment protection.
26
Dis mantling the batteries
1. Disconnect the device from the mains.
2. Detach the knife head [5].
3. Press against the knife head from the top and remove the device.
4. Loosen the two screws [13] below the knife head [5] and the screw [13] on
the underside of the device [12].
Use a Torx T6 screwdriver (not included in the scope of delivery).
5. Remove the lower section of the housing [12].
6. Break open the battery [11] using a screwdriver and dispose it off properly.
E nvironmental protec tion
This electronic device includes a NiMH battery. The battery must be
dismantled for disposal (see paragraph "Dismantling the batteries").
Under no circumstances may the battery be disposed off in the non-recyclable
waste bin.
If the electronic device is not going to be used any longer, deliver it to the sales
outlet or to a separate collection point of the concerned local public disposal
facility (recycling or raw material yards etc.).